Crush zone hazards, Locations – MTS Acumen Electrodynamic Test System Load Frame User Guide User Manual
Page 55
Description
LED Color
AC power to the frame is off.
Unlit - Solid
Interlocked.
Red - Solid
Service mode. Contact MTS Technical Support.
Red / White - Flashing
Interlock cleared, standby power is on.
White - Solid
Interlock cleared, low power.
Blue - Blinking
Interlock cleared, high power, not running.
Blue - Solid
Interlock cleared, temperature warning.
Yellow - Solid
Interlock cleared, running state.
Green - Solid
Crush Zone Hazards
It is important to stay clear of any potential crush zones when the system is operating. Know where the crush
zones are in your system and protect yourself and others from those crush zones with appropriate safety
devices. The following paragraphs describe crush zones and precautions to take while working around crush
zones.
Locations
A crush zone exists between the T-slot base and crosshead.
MTS Acumen™ Electrodynamic Test System 55
Operation