MTS Acumen Electrodynamic Test System Load Frame User Guide - Manual (Page 57)

Frame-Mounted Control
The frame-mounted control can be attached to the left or right side of the frame. It provides controls to help
you mount fixtures, and install specimens. The frame-mounted control also has an alphanumeric display and
illuminated icons to provide feedback.
Note:
When exclusive control is provided by the frame-mounted control, the actuator controls on the MP
application will be locked and overlaid by the frame-mounted control exclusive control icon:
The following figure separates the frame-mounted control into boxed sections that are described in the table
that follows.
Frame-Mounted Control
MTS Acumen™ Electrodynamic Test System 57
Operation