Routine maintenance overview checklist – MTS Acumen Electrodynamic Test System Load Frame User Guide User Manual
Page 62
Routine Maintenance Overview Checklist
Important:
There are no customer serviceable components on the MTS Acumen frames. Maintenance consists
of keeping the frame and work area clean, general inspection, checking interlocks, and scheduled
frame calibration.
Recommended Service
Annually
Monthly
Daily
Calendar Time Using 8 Hours Running
Time Rate per Day
2000
160
8
Running Time-Hours
X
Clean work area / Machine Surfaces
X
Check Frame Mounted Control Emergency
Stop
X
Check Remote Emergency Stop (If
Present)
X
Check Test Area Enclosure - Open Door
Applies Low Velocity
Load Frame / Crosshead
MTS
Check Crosshead Locks For Proper
Operation
MTS
Check Crosshead Lift Belt For Wear
MTS
Check / Adjust Crosshead Lift Belt Tension
MTS
Check / Clean Crosshead Lift Screws
MTS
Check / Clean Columns
MTS
Assure Crosshead Movement Is Smooth
Actuator
MTS
Check Cooling System Is Operational
MTS
Clean Exposed Cooling Surfaces
MTS
Assure Actuator Movement Is Smooth
MTS
Check Actuator Guidance Mechanism
MTS
Check Brake Operation
62 MTS Acumen™ Electrodynamic Test System
Maintenance