MTS Series 322 Load Frames - Manual (Page 41)

Unpack and Move the Platen
Series 322 Load Unit Installation 41
4. Attach the lifting straps to the lifting eyes. Adjust them so each lifts about
the same weight.
Keep your straps as straight as possible — do not let them get more than 30°
from the vertical.
5. Lift the platen clear of its pallet and move it carefully to its installation site.
6. Lower the platen onto the isolation pads. If the platen is not level, install
stock metal shims between the pads and the floor.
Attach straps
30° maximum