MTS Series 322 Load Frames - Manual (Page 43)

Install the Crosshead Assembly
Series 322 Load Unit Installation 43
1. Tighten the crosshead manual locking bolts.
Manually locked
crosshead
Check the torque on the locking bolts, following the pattern in the following
figure.
Make sure the locks are tight.
Load Unit Rating 100 kN (22 kip)
100 N·m (140 lbf·ft)
Load Unit Rating 250 kN (55 kip)
271 N·m (200 lbf·ft)
Load Unit Rating 500 kN (110 kip)
Rear
271 N·m (200 lbf·ft)
Load Unit Rating 500 kN (110 kip)
Front
271 N·m (200 lbf·ft)