MTS Series 793 Controller - Manual (Page 28)

MTS Series 793 Controller Overview
FlexTest SE Controller Description
Controller Hardware 28
Booting the controller in the automated mode disables several of the menus on
the front panel of the controller. These menus are used for testing in non-
automated FlexTest SE Basic models. To compensate for the disabled front-panel
menus, you use the Station Manager application interface on the PC to set up and
run tests.
The FlexTest Controller
manages specimen
installation. You use the
FlexTest SE Controller to
position the actuator when
loading specimens. The PC manages
testing. You use a PC
loaded with Series 793
Software to design and
run tests.