MTS Series 793 Controller - Manual (Page 38)

MTS Series 793 Controller Overview
Software Options Available with Key Codes
Controller Software 38
Model 793.04 PC-Per-
Station Kit
The PC-Per-Station Kit allows you to use up to four PCs with your FlexTest IIm,
or FlexTest GT Controller. Multiple PCs linked to a single controller allows
different operators to run their assigned stations without having to share PCs. It
also decreases downtime since multiple operators can run different tests
simultaneously (at their assigned stations) through a single controller.
Model 793.05/.06/.07/
.08/.18 Compensators
Compensators compare your command with the corresponding sensor feedback
to ensure that the command is fully applied to the specimen. If the sensor
feedback indicates the specimen is not reaching the commanded levels, the
compensator alters the command until the desired result is achieved.
The PC-Per-Station kit
allows each test station to
have its own PC. (Test
stations are equipped with
separate hydraulic service
manifolds.)