MTS Series 793 Controller User Manual
Page 70
MTS Series 793 Controller Overview
MPT Process Types
Operation Concepts
70
Data Acquisition Processes
I
CON
P
ROCESS
N
AME
D
ESCRIPTION
Peak/Valley Acquisition
Records the peak/valley data for each cycle execution.
Timed Acquisition
Records data at user-specified time intervals.
Max/Min Acquisition
Records data at the highest peak and lowest valley during the life
of the process.
Level Crossing Acquisition
Records data each time the selected signal changes by a
specified amount.
High Speed Timed
Acquisition
Records bursts of data at a high rate.
Cyclic Acquisition
Monitors sensor feedback that results from cyclic command.
This process acquires data from feedback according to equal
changes in time, equal changes in amplitude, changes in time and
amplitude, or signal reversals.
Fatigue (Optional)
Accumulates cycles in a histogram, then calculates damage
based on the data on that histogram. The damage number is also
sent to the Fatigue Monitoring application.
Time History Input
(Optional)
Acquires and digitizes multiple channels of analog test response
data in the RPC III file format.
Trend (Optional)
Calculates statistical values on time series data. The values are
then stored to disk. It is also sent to the Trend Monitoring
application.