MTS Series 793 Controller User Manual
Page 41
Software Options Available with Key Codes
MTS Series 793 Controller Overview
Controller Software
41
Model 793.25 CAN Bus
Support
The Model 793.25 CAN Bus feature supports CAN bus devices. CAN bus is a
computer network protocol and bus standard that allows devices to communicate
with each other without a host computer. You can use CAN Bus resources in
control loops and event-action sequences.
Model 793.26 Signal
Based Command
The Model 793.26 Signal Based Command process allows you to generate
command based on signal values specified in a predefined lookup table. The
lookup table is contained in a tab-delimited text file which defines the
relationship between command and signal values.
Model 793.71 Time
History Playout (THP)
An MPT process that allows you to drive a test system equipped with an MTS
Remote Parameter Control (RPC) time history file.
Model 793.72 Time
History Playout with
Data Acquisition (THD)
An MPT process that allows you to acquire and digitize analog test response data
in the MTS RPC III file format and floating point time history files. RPC analysis
software allows you to calculate the system transfer function of the system with
the digitized file.
Model 793 Multibox
Option
The Model 793 Multibox Option allows the use of networked chassis to provide
additional hardware resources.
Model 793.100/101
Hybrid Simulation
The Model 793.100 Hybrid Simulation (Internal Model) and Model 793.101
Hybrid Simulation (External Model) options allow 793 software and hardware to
interface with simulation models.
For more information
For more irnformation about compensators, see
For more information about creating test procedures with MPT, see