MTS Series 793 Controller - Manual (Page 77)

Test Desktop
MTS Series 793 Controller Overview Operation Concepts 77
Test Desktop
With the Station Manager application window controls, you can perform the
following to run tests:
• Load and reload stations
• Configure limit and error detectors
• Control hydraulic pressure to the test station
• Manage the execution of the Basic TestWare and MultiPurpose TestWare
applications
• Monitor signals on the built-in scopes and meters
Windows typically open while running a test.
The windows shown here all display some element of status while a test is
in progress, and can be displayed on the desktop until the test is complete.
This example shows an MPT test in progress.
Meters display the numeric value of
selected signals.
The Station Manager application main
window displays interlock and limit
status; counters; run, stop, and hold
status; and generated messages.