New Era NE-1000 Multi-Phaser Programmable Syringe - Manual (Page 53)

New Era Pump Systems Inc.
www.SyringePump.com
Model NE-1000 Multi-Phaser™
Publication #1200-01 48 08/01/14
Pump doesn’t stop after dispensing a set volume: The pump was previously setup with a multiple Phase
Pumping Program. To simply dispense a fixed volume at a fixed pumping rate, the second Program Phase
must be the ‘Stop’ function. See section 9.1, How to Enter Pumping Programs, for instructions on changing
the Pumping Program.
Pump stops pumping after a period of time: A dispense target volume has been set. Verify that the
dispense target volume is set to 0.
12.5 Specifications
Mechanical & Electrical Operational
Syringe sizes: Up to 60 mL (140 mL
partially filled) Maximum speed: 5.1005 cm/min
Number of syringes: 1 Minimum speed: 0.004205 cm/hr
Motor type: Step motor Maximum pumping
rate: 1699 mL/hr with a B-D
60 mL syringe
Motor steps per
revolution: 400 Minimum pumping
rate: 0.73 µL/hr with a B-D 1
mL syringe
Microstepping: 1/8 to 1/2 depending on
motor speed Maximum force: 35 lbs. at minimum
speed, 18 lbs. at
maximum speed
Advance per step: 0.2126 um to 0.8504 um
depending on motor speed Number of Program
Phases: 41
Motor to drive screw
ratio: 15/28 RS-232 pump network: 100 pumps maximum
Drive screw pitch: 20 revolutions/” RS-232 selectable baud
rates: 300, 1200, 2400, 9600,
19200
DC connector: 2.1 mm, center positive Syringe inside diameter
range: 0.100 to 50.00 mm
Voltage at DC
connector: 12V DC at full load
Amperage: 800 mA at full load
Power supply type: Unregulated linear external wall adapter, country and power source specific (or
compatible regulated power supply)
Power supply output
rating: 12V DC @ 800 mA
Dimensions: 8 3/4” x 5 3/4” x 4 1/2” (LxWxH) (22.86 cm x 14.605 cm x 11.43 cm)
Weight: 3.6 lbs. (1.63 kg)
Allen Wrench 3/32 Hex
12.6 Custom Applications
For specialized and OEM applications, contact your dealer or
New Era Pump Systems Inc. Custom modifications can be
made to the mechanics or the firmware.