BT In Touch 2000 - Manual (Page 23)

Press the Quickdial memory buttons
you wish to give emergency status.
The display shows the memories you
have selected for emergency status,
for example:
Press Store. The emergency status is
announced, e.g. “Emergency status on”
or “Emergency status off ”. The display
shows the memories you have set with
emergency status, such as:
These Quickdial memories now
have emergency status.
Please note
You cannot allocate emergency status to a Quickdial
memory without first storing a telephone number.
If you try, you will hear “Error. Store number first”.
To confirm and change which numbers have
emergency status
Press the Store button.
Press the # button.
The display shows, for example:
Press the appropriate M1/M2/M3
memory buttons to toggle between
emergency status on/off.
Press the Store button to confirm.
Important
If you have not given emergency status to any
Quickdial memories, your BT In Touch 2000 User
Phone will announce “Warning no emergency
numbers” at the end of the programming sequence.
This message will only stop when you allocate
emergency status to at least one of the Quickdial
memory numbers.
✓
23
User
Phone
&
P
endant
EMERGENCY STATUS
M1 M2
Store
ENTER MEMORIES THEN PRESS STORE
then
ENTER MEMORIES
M1 M2
EMERGENCY STATUS
M1 M2 M3
EMERGENCY STATUS
M1 M2
If all 3 numbers have
emergency status
If only M1 and M2 have
emergency status
Store
Store