BT In Touch 2000 - Manual (Page 63)

R
63
Carer
Phone
Using the Quickdial memories
You should have already stored your User
numbers as Quickdial memory numbers.
(See page 52).
To dial a Quickdial memory number
Lift the handset, or press the
Handsfree button.
Press the required Quickdial memory
button, for example M1, M2 or M3.
The number stored on that Quickdial
memory button is dialled.
To change Quickdial memory numbers
Important
You can only change a Quickdial memory number
once its emergency status has been removed.
See ‘To confirm and change which numbers have
emergency status’ on page 54.
To change a number stored in the
memory, repeat the process for storing
numbers, but enter the new number
(see page 52). The new number will
automatically replace the old number.
Then give it emergency status again if
you wish it to be included as an
emergency User number (see page 53).
Using the R (Recall) button
This button is used with some network
services or if your phone line is connected to
a switchboard.
To find out more about BT Select Services,
please call BT free on 0800 800 150.
Secrecy
To use the Secrecy button
This allows you to talk to someone in
the same room, without the person on
the other end of the line hearing your
conversation.
Press and hold down the Secrecy
button. The Secrecy light will come on.
Release the Secrecy button to
continue your call.
Handsfree
Secrecy