BT In Touch 2000 - Manual (Page 40)

Cancel
Using your Cancel button to stop
an emergency call
The Cancel button has a dual function. It can
be used to stop an emergency call and also to
delete entries in the Calls List and Directory.
To stop an emergency call
Press and hold down the Cancel
button until the emergency light stops
flashing and beeping.
You will then hear a double beep to
confirm the call has been terminated
and the display will show:
Warning alerts
If your BT In Touch 2000 User Phone detects
that there is no mains power, the telephone line
has been disconnected or the batteries are low,
it will alert you by playing warning alerts.
It will also convey this information to the Carer
as part of the emergency message.
Low batteries
When the batteries have about 2 weeks life left,
the phone will announce “Batteries low” and the
display will show:
When the batteries are fully drained the phone
will announce “Change batteries” and the
display will show:
No mains power
When there is no mains power, the phone will
announce “No mains power” and the display
will show:
Assuming your batteries are not fully drained,
your phone will revert to battery back-up until
the mains power is restored. All your Quickdial
memory numbers and their emergency status
will be therefore be retained.
Please note
(The maximum back-up period is 7 hours - however,
if the phone is in constant use, the back-up period
could be as little as 1 hour.)
40
User
Phone
&
P
endant
EMERGENCY
CANCELLED
12:00 AM 01 JAN
CHANGE BATTERIES
12:00 AM 01 JAN
NO MAINS POWER
12:00 AM 01 JAN
CHANGE BATTERIES