BT In Touch 2000 - Manual (Page 54)

OPERATE DIAL TO
SET DIVERT
Divert
54
Carer
Phone
To confirm and change which numbers have
emergency status
Press the Store button.
Press the # button.
The display shows, for example:
Press the appropriate M1/M2/M3
memory buttons to toggle between
emergency status on/off.
Press the Store button to confirm.
Please note
It is recommended that you now test that you have
correctly stored the User numbers as Quickdial
memories and that emergency status has been
given, where required.
Please note
As the Carer, if any of your emergency contact
numbers relies on a switchboard, for example, the
call goes to an office where a secretary/switchboard
operator receives the call before passing it on to
you, then you are advised to inform and train them
in how to manage an emergency call from the User.
Using the Divert button
The Divert button allows the Carer to divert
any calls including an emergency call to a
mobile phone or any other phone.
Please note
To use this feature you must first subscribe to a
Call Diversion network service. The Divert service
applies to any phone you have in your home. If you
have Divert programmed on another phone, your
incoming emergency call will be diverted to that
phone number. Divert is specific to your telephone
line and not individual telephone equipment.
To set calls to divert to another phone
Press the Divert button.
The display shows:
EMERGENCY STATUS
M1 M2 M3
EMERGENCY STATUS
M1 M2
If all 3 numbers have
emergency status
If only M1 and M2 have
emergency status
Store
Store