BT In Touch 2000 - Manual (Page 41)

TELEPHONE LINE
DISCONNECTED
41
User
Phone
&
P
endant
Telephone line disconnected
When the phone line cord is not connected to
the phone line socket, the phone will announce
“Telephone line disconnected”
and the display
will show:
Optional settings of the BT In Touch
2000 User Phone
You can use the Setup button, located under
the memory label, to set and change the
optional feature settings.
Voice prompts
When you set voice prompts to ON, your
BT In Touch 2000 User Phone will confirm each
numeric key press with an announcement.
For example, if you press 7 you will hear “Seven”.
To set the voice prompts to ON or OFF
Lift the Quickdial memory label to
reveal the Setup button.
Press the Setup button.
Then press the 2-digit code to change
the relevant setting:
00 Optional voice prompts ON.
Display will show:
With voice prompts set to ON, the
following are examples of what you
can expect to hear:
If you press the 1 button, “One” will be
announced.
If you press the M1 button, “Dialling
memory one”
will be announced.
(Only if emergency status has been
given to that Quickdial memory).
01 Optional voice prompts OFF.
(Default setting). Display will show:
Then press the Setup button to
confirm the setting.
Emergency cancel timer
The emergency cancel timer is the time the
phone takes to start the emergency sequence
after you press the Emergency button (on the
phone or Pendant). The time can be changed
from one to nine seconds in order to help you
test your BT In Touch Pendant.
VOICE OFF
SET UP
Setup
VOICE ON
SET UP
Setup
Announce
Setup