BT In Touch 2000 - Manual (Page 29)

29
User
Phone
&
P
endant
Using the BT In Touch Pendant in
an emergency
To use the BT In Touch Pendant in an
emergency, you simply press the
Pendant button. The small red light
will flash to confirm that the Pendant
button has been pressed.
Your BT In Touch 2000 User Phone
will dial the stored emergency contact
numbers you have programmed (see
page 22).
IMPORTANT
If the Pendant button is pressed at the same time
as a call is coming in, then your BT In Touch
2000 User Phone will assume that you want to
receive the incoming call rather than start the
emergency sequence.
BT In Touch Pendant battery low
warning
When the battery in your BT In Touch Pendant
has about 1 month’s life left, the BT In Touch
Pendant will warn you by flashing 3 times
every time the Pendant button is pressed, and
the voice prompt will say “Replace Pendant soon”.
This gives enough time for you or your Carer
to order a replacement BT In Touch Pendant
by ringing BT on Freefone 0800 800 150, or
the product Helpline on 0845 6011 406 and
quoting Item Code 871769.
Registering a replacement
BT In Touch Pendant
To register a new or replacement BT In Touch
Pendant, you must follow the instructions in
“Registering your BT In Touch Pendants”
,
see page 26.
Important
If you have 2 BT In Touch Pendants, you must
make sure you register both Pendants.