BT In Touch 2000 - Manual (Page 49)

RINGER
VOLUME
HI
LOW
OFF
RINGER
R1
R2
R3
49
Carer
Phone
Warning
Before installing (or replacing) the batteries, the
phone must be disconnected from the phone line
and the mains power.
Open the battery cover on the underside of
your BT In Touch 2000c Carer Phone. Insert
the 6 x AA Alkaline batteries.
Please note
The BT In Touch 2000c Carer Phone will beep
and a warning message will appear in the display
if the telephone line is disconnected or there is no
mains power. Don’t worry - this just means the
alert features on the phone are working.
3 Connect the telephone
line cord
If you do not have a modern phone socket,
then you can call BT on Freefone 0800 800 150
and ask for a BT engineer to come and fit the
correct type. This is a chargeable service.
4 Select ringer volume
The ringer volume switch is on the underside
of your phone.
Set the volume of the ringer to High, Low
or Off.
This should be done before you attach the base
stand for either raised or wall-mounted positions.
5 Select ringer tone
The ringer tone switch is on the underside of
your phone.
This switch allows you to select the pitch
required for the ringer.
R1: for a low-pitched tone
R2: for a medium-pitched tone
R3: for a high-pitched tone
This should be done before you attach the base
stand for raised or wall-mounted positions.