MacDon Transport 30-36 ft and 39 ft 974 - Manual (Page 14)

TRANSPORT OPTION
Form # 46581 Issue 11/04 13
CONVERTING FROM FIELD POSITION
TO TRANSPORT (continued)
15. Engage other end of diagonal brace on pin at
strut. Secure with lynch pin.
16. 972 & 973 Headers only: Hook the J-bar on
back edge of cutterbar and through head of
diagonal brace. Secure with lynch pin. For
972 & 973 Headers with 973 style cutterbar
poly skids, use the longer J-bar provided in
poly kit.
17. Install pins removed in step 10 in transport
position (A), engaging the hole in spring
loaded bracket as shown in lower right photo.
Secure with split ring.
18. Raise header fully and engage lift cylinder
stops.
19. At R/H rear wheel, push down on handle (F)
and lock under welded bolt head to raise pin
(G) to allow wheel to pivot. Pivot wheel to
transport position. Release handle (F) from
under bolt head to lower pin (G) and lock in
transport position.
STEP 16: INSTALL J-BAR –
972 & 973 HEADERS
F
A
STEPS 17 - 19:
POSITION R/H REAR WHEEL
G
STEP 15: SECURE BRACE TO STRUT
A