RKI Instruments GX-8000(PT0-098) - Manual (Page 23)

4 How to Use 4-5. How to detect
- 23 - GX-8000
<Manual Memory>
Any instantaneous value during measurement can be recorded.
Up to 256 points of data can be recorded. When the number of recorded data points reaches the maximum,
recorded data will be overwritten, starting from the oldest data.
(1) In the detection mode, keep the ▼/RESET switch pressed and press the ▲/AIR switch to prepare for
recording (about one second). The following screens are displayed in turn on the gas monitor.
NOTE
The screen displays the memory number, date, and instantaneous value in turn. Go to the next step to
execute recording. No value is recorded at this point yet. If you do not want to record a value, press the
DISPLAY switch to return to the detection mode.
(2) Press the ENTER switch. The date and the instantaneous value at the time when the ENTER switch is
pressed are recorded.
(3) When END is displayed, the recording is completed.
Returns to the detection mode.