RKI Instruments GX-8000(PT0-098) - Manual (Page 29)

4 How to Use 4-8. Display/setting mode
- 29 - GX-8000
NOTE
The gas monitor automatically returns to the detection mode in about 20 seconds if the gas monitor is left
unoperated.
However, the gas monitor does not automatically return to the detection mode if the pump operation is set
to OFF.
Pump ON/OFF Setting
Used to turn on/off the pump
operations.
ENTER
Pump ON/OFF Setting
⇒ P33
ID Display/Selection
Display an ID if it has been
registered in advance. Also used
to select an ID.
ENTER
ID Display/Selection
⇒ P34
Log Data Display
Display concentration data
recorded to the manual memory.
ENTER
Log Data Display
⇒ P35
To Detection Mode