RKI Instruments Beacon 200 Rig Monitor, LEL/H2S - Manual (Page 8)

3 • Beacon 200 Rig Monitor Operator’s Manual
Specifications
Table 1 lists specifications for the Beacon 200 Rig Monitor.
WARNING: When using the Beacon 200 Rig Monitor, you must follow
the instructions and warnings in this manual to assure
proper and safe operation of the Beacon 200 Rig Monitor
and to minimize the risk of personal injury. Be sure to
maintain and periodically calibrate the Beacon 200 Rig
Monitor as described in this manual.
Table 1: Beacon 200 Rig Monitor Specifications
Description Specification
Input Power 10.8 - 14.5 VDC, 1.2A VDC
Construction (housing) Fiberglass/polyester with lexan window (NEMA 4X)
Controller Dimensions 21.0 in. H x 8.5 in. W x 7.00 in. D
(533 mm H x 216 mm W x 178 mm D)
Weight 20 lbs.
Environmental Conditions • -20°C to 50°C (-4°F to 122°F) max. ambient
• Maximum humidity of 80% relative
Relays • Relay contacts rated for 10A @ 115/220V~ resistive or10A @ 30V
resistive
• SPDT Form C
User Controls • Reset switch
• Program buttons: ESCAPE, UP/YES, DOWN/NO, and ENTER
Detection Range Channel 1: 0 to 100% LEL combustible gas, methane calibration standard
Channel 2: 0 to 100 PPM (parts per million) H
2
S
Response Time 90% in 30 seconds
Accuracy LEL: ± 5% of reading or ± 2 % LEL (whichever is greater)
H
2
S: ± 5% of reading or ± 2 ppm H
2
S (whichever is greater)