SDC E5 Series Access Control System - Manual (Page 27)

COPYING CARDHOLDER PROFILES
COPYING READER DATA
Select Database
Select Copy Reader Data (5-1)
Use this screen to copy system configuration
and scheduling data from one reader to
another. Note: A minimum of two readers
must be configured in the Reader Parameters
(1-1-2).
To Copy:
1. Select a source reader in the Copying
From box and then check the appropriate
boxes below to select the type of data to copy.
2. Select the reader in the window to the right
that you wish to copy the configuration data to.
3. Press Save , and press Yes to confirm, or
No to cancel.
Select Database
Select Copy Cardholder Profile (5-2)
Use this screen to copy cardholder
configuration data from one cardholder
profile to another.
To Copy:
1. Select a source card in the Copying
From box and select the items that you
wish to copy.
2. Select the cardholder(s) in the window
to the right that you wish to copy the
data to.
3. Press Save and Select Yes to
confirm, or No to cancel.
P:\Installation Instructions\Access Controls\Inst-E5\INST-E5.vsd Rev C 03-13 Page: 24