Vicor Full-chip PRM-RS Customer Board - Manual (Page 2)

UG:009 vicorpower.com Applications Engineering: 800 927.9474 Page 2
2.0 Features
The full-chip PRM-RS Customer Board has the following features:
1. Input and output lugs for source and load connections
2. Input fuse (appropriately rated)
3. Input capacitor for source decoupling
4. Test points for access to various device pins and circuit voltages
5. Trim pot for adjusting the output voltage set point
6. Voltage regulation, and current sensing circuitry appropriately set for proper operation
7. Recommended output filter inductor
8. Dual output headers (female) for transferring power and signal connections to downstream
VTM ® Customer Board.
9. Switch for enabling / disabling the device through the PC pin
10. Oscilloscope probe jack for making accurate output voltage measurements
11. Provisions for installing custom VI Chip ® push pin heat sink with grounding clips (optional,
included with board)
3.0 Board Description
The following section provides a detailed description of the full-chip PRM-RS Customer Board
components and test points.
Figure 1
Board Description