Vicor Full-chip PRM-RS Customer Board - Manual (Page 8)

UG:009 vicorpower.com Applications Engineering: 800 927.9474 Page 8
5.0 VTM ® Customer Boards
The full-chip PRM-RS Customer Board is designed to work with all types of VTM ® Customer Boards
to facilitate testing of virtually any PRM ® /VTM module combination. Note that there are currently two
basic types of VTM Customer Boards. Both board types share many common features, including input
capacitance, output capacitance, and various test points. The main difference between the two board
types is the number of connectors. Before configuring a PRM / VTM board setup, the user should
identify which type of VTM board is being used.
5.1 VTM Customer Board Type A (Single Connector)
The VTM Customer Board Type A contains a single power / signal header designed to mate with
only X01 on the full-chip PRM-RS Customer Board. The VTM module output voltage, and VC
signal are transferred through this header when connected to a PRM Customer Board.
VTM TM CUSTOMER BOARD
TYPE A
Power / Signal Connector
-IN
-IN
-IN
-IN
+IN
+IN +IN
+IN
VC
VC
Figure 5
VTM Customer Board Type A
Figure 6
VTM Customer Board Type A
Connector Pinout (Front View)