4 configuring the ie-gprs-io, 4configuring the ie-gprs-io, Configuration – Weidmuller GPRS Alarm Unit User Manual
Page 28
Configuration
4-26
4
Configuring the IE-GPRS-IO
To start up your IE-GPRS-I/O, it must be configured first. The individual
steps for starting up will be explained in the present chapter.
4.1
Configuring the IE-GPRS-I/O via the RS 232
interface
The IE-GPRS-I/O is connected to a PC via the RS 232 interface
"RS232" using a modem cable. The RS232 protocol is used directly.
The IE-GPRS-I/O is addressed using Internet Explorer 5.5 or higher.
In the MS Windows operating system, install your IE-GPRS-I/O as a
modem for a long-distance data transmission connection.
4.1.1 Setting up the virtual modem and the long-
distance data transmission connection under
Windows XP/2000
If the modem and the long-distance data transmission connection are
already set up, proceed as described in Section 4.1.2.
•
Installing a new modem:
Select Start – Settings – Control Panel - Phone and
Modem Options
and there
•
"Modems – Add"
tab.