Configuration – Weidmuller GPRS Alarm Unit User Manual

Page 43

Advertising
background image

Configuration

4-41

Quit Pin

•

4-digit sequence of digits which is used to acknowledge SMS and
voice messages.
Acknowledgement must be enabled in the menu Messages with a
þ , i.e. acknowledgement of the messages is imperative (see
Section 4.6).

•

Only digits may be used.

•

If 0000 is entered, you can use any numeric key of your telephone;
in this case, only one key must be pressed.

•

Always 4 digits.

SIM PIN

•

4-digit number which is supplied with your SIM card

•

It is imperative to configure the SIM PIN if the SIM card requires a
PIN.

•

If you have set your SIM card such that no PIN is required, 0000
must be entered to allow the device to log into the GSM network
without SIM PIN.

•

Make sure that you enter the correct SIM PIN; an incorrect PIN,
however, will not usually block your SIM card (max. 2 attempts are
accepted to enter the PIN); but this cannot be guaranteed.

•

If your SIM PIN is not properly configured, no message can be
triggered and thus no remote access to the device is possible.

•

Older 5V SIM cards cannot be used.

•

Always 4 digits.

Redialling

•

Number of further attempts made by the device when a message is
to be sent if a target number cannot be reached or an error has
occurred.

•

1 automatic redial means max. 2 attempts.

•

If a message is sent as an SMS with receipt acknowledgement, the
number of automatic redials applies first for the SMS and then once
more for the acknowledgement.

•

The next recipient in the messaging chain is only processed after
the maximum number of automatic redials is reached.

•

Automatic redialling may also occur if the message has reached the
recipient, but, for example, an error has occurred in the final phase
of the message.

•

0 ... 9

Advertising