Weidmuller GPRS Alarm Unit - Manual (Page 66)

Configuration
4-64
Mode
• Master:
Master IE-GPRS-I/O talks -> all slaves listen
• Slave:
Slave IE-GPRS-I/O talks -> only the master listens
• Master/slave:
Listens to everybody
Connect automatically
• If Connect automatically is enabled, the IE-GPRS-I/O
attempts to establish the connection to the exchange server
automatically after a reset.
Send all input states
• Time interval at which the IE-GPRS-I/O sends its input status to the
exchange server
▫ 0 means that the input status is sent not cyclically.
4.11 COM port
Settings for the serial interface for the data traffic with connected
devices. The serial interface is only activated in the DIP switch position
1-0-0-0
in the "Configuring" mode; in the "Diagnostic" mode 0-1-0-
0 , it is set to 38,400 Baud as a fixed transfer rate.
See Section 3.4 Communication between PC and IE-GPRS-I/O.