9 function control, Configuration – Weidmuller GPRS Alarm Unit User Manual
Page 62
Configuration
4-60
4.9
Function control
The IE-GPRS-I/O can issue a cyclic message (sign of life) as a function
monitoring signal.
Text
•
Enter the text you wish to be displayed in the message in the text
field, for example "
Fault: Pump1
".
▫ The maximum length permitted, including all text blocks, is
160 characters.
Longer texts are truncated.
It is possible to use text blocks to create a message text
dynamically, see Section 4.6 Alarm Message.
Target
•
Two targets can be specified.
▫ Enter the appropriate target mobile telephone number for short
messages (SMS).
▫ Enter the appropriate target e-mail address for e-mails, etc.
Sun - Sat
•
Enter the day of the week, time 00:00 and interval 0 min here.
▫ The message is sent on the weekday set and at the time set.
▫ If an interval > 0 has been set, a message is issued at the
interval as specified in minutes.
This process ends at midnight of the set weekday.