Weidmuller WI-I/O 9-K: Wireless I/O Transmitter v1.9 - Manual (Page 52)

WI-I/O 9-K v1.9
Page 52
configurable 0.5-100 seconds.
Analogue Input Setpoint Configurable high & low setpoint
may be transmitted to remote
units, allowing set/reset of
remote digital outputs
System Parameters
Network Configurations Max. number of WI-I/O
9-K inputs is >20,000 if
WI-I/O 9-C/G modules
are used as receivers.
WI-I/O 9-K is compatible with
WI-I/O 9-x radio telemetry units
which may be used as repeaters,
provision of outputs, or as
network master unit to connect to
PLC or PC
User Configuration Windows Configuration Software
Diagnostics
On board diagnostics Automatic check on
startup
Microprocessor operation OK
Diagnostics included in
configuration software
Input status, test transmission
signal