Weidmuller WI-I/O 9-L: Wireless I/O Transmitter / Receiver v1.3 - Manual (Page 11)

WI-I/O 9-L Configuration Manual
WI-I/O 9-L Wireless I/O page 11 of 108
The WI-I/O 9-L family of modules includes both a transmitter (WI-I/O 9-L-T) and a receiver
(WI-I/O 9-L-R). You can:
Send signals from the transmitter to the receiver ;
Send signals from the transmitter to other Weidmuller, Inc. I/O modules ; and
Send signals from other Weidmuller, Inc. I/O modules to the receiver .
The transmitter and receiver include a default function to work as a pair by sending signals
from the transmitter to the receiver with the most commonly used inputs of the transmitter
being mapped to the outputs of the receiver. You can restore the default function at any time
by “linking” the receiver to the transmitter.
You can create more complex configurations using the WI Series software, including sending
signals via repeater stations and sending signals to other Weidmuller, Inc. I/O modules.
For configuration both modules have an RS232 RJ-45 connector on the front panel for
configuration that you can use in conjunction with the serial configuration cable supplied by
Weidmuller, Inc..