Weidmuller WI-I/O 9-L: Wireless I/O Transmitter / Receiver v1.3 User Manual
Page 95

WI-I/O 9-L Configuration Manual
WI-I/O 9-L Wireless I/O
page 95 of 108
WI Series transfers configuration information between your PC and the WI-I/O 9-L using
serial ports.
You must set the serial port to use for transferring the configuration information. This is the
serial port that has the configuration cable connected to the module you are programming.
To set the serial port:
1. Open the project.
2. Select
Utilities
»
Serial Port Setup
.
3. Select the serial port you want to use for configuring the unit (e.g. Com 1):
4. WI Series marks the serial port with a tick and uses the serial port the next time you
transfer configuration information between your PC and a module. The selected serial
port is also displayed in the Comm Port field at the bottom left of the WI Series window.
5. You can now transfer configuration information between your PC and the module. For
more information, see the next section.