Rockwell Automation 20D-DL2-ENETO DriveLogix 5730 Controller Embedded EtherNet/IP Option Card - Manual (Page 2)

2 Embedded EtherNet/IP Option Card for DriveLogix™5730 Controllers
What You Need to Do To remove a Embedded EtherNet/IP Option Card from a PowerFlex 700S
drive:
❐ Step 1: Remove power from the drive
❐ Step 2: Open the main drive door
❐ Step 3: Remove the control cassette from the drive
❐ Step 4: Remove the inside cover from the control cassette
❐ Step 5: Remove the old Embedded EtherNet/IP Option Card from the
drive
To install a new Embedded EtherNet/IP Option Card onto a PowerFlex
700S drive:
❐ Step 6: Install the Embedded EtherNet/IP Option Card
❐ Step 7: Replace the covers and control cassette
❐ Step 8: Configure EtherNet/IP communications
❐ Step 9: Document revision changes
To return a replaced Embedded EtherNet/IP Option Card, use packing
material from the new Embedded EtherNet/IP Option Card.