Rockwell Automation 20D-DL2-ENETO DriveLogix 5730 Controller Embedded EtherNet/IP Option Card - Manual (Page 7)

Embedded EtherNet/IP Option Card for DriveLogix™5730 Controllers 7
Step 9: Documenting
Revision Changes Document drive revisions on the “Field Installed Options” tag. Use the
blank line if you are installing the Embedded EtherNet/IP Option Board in a
drive that was manufactured without it.
FIELD INSTALLED OPTIONS
Firmware #: Date
Firmware
20-HIM
28-IO-
20-COMM-
20B_-DB1-
HIM
I/O
COM Module
Internal Dynamic Brake
#: Date
TIP: Use packing material from new Embedded EtherNet/IP Option Board
to return the replaced Embedded EtherNet/IP Option Board