Rockwell Automation 20P PowerFlex DC Drive - Frame C Pulse Transformer Circuit Board User Manual
Page 10
Advertising
10
Rockwell Automation Publication 20P-IN010C-EN-P - February 2012
PowerFlex DC Drive Frame C Pulse Transformer Circuit Board
10. For Pulse Transformer boards with an armature voltage feedback terminal
block, FIR3-XX, rev. “M” and higher, remove the cable from connector
XCD_IO on the upper right corner of the board.
11. Remove the six screws that secure the board to the drive and remove the
board.
XCD_IO
TO6
KGO6
T6
KG6
PE
PE1
XCD
Remove cable from XCD_IO connector
Remove screws
Note: Regenerative drive shown.
Advertising