Rockwell Automation 22-COMM-L LonWorks Adapter - Manual (Page 11)

Chapter
1
Getting Started
The 22-COMM-L LonWorks adapter is a communication option
intended for installation into a PowerFlex 40 or PowerFlex 400 drive. It
can also be used with other Allen-Bradley products that support a DSI
comunication adapter, such as the DSI External Comms Kit
(22-XCOMM-DC-BASE). The External Comms Kit enables PowerFlex
4 drives (which cannot support an internally-mounted adapter) to
connect to a LonWorks network.
Figure 1.1 Components of the Adapter
Topic Page Topic Page
Components 1-1 Safety Precautions 1-4
Features 1-2 Quick Start 1-5
Compatible Products 1-3 Modes of Operation 1-6
Required Equipment 1-3
Components
Item Part Description
➊
Status Indicators Three LEDs indicate the status of the connected drive, adapter,
and network. Refer to Chapter 5 , Troubleshooting , for details.
➋
DPI Connector A 20-pin, single-row shrouded male header. An Internal
Interface cable connects to this connector and one on the drive.
➌
Terminal Block A 6-screw terminal block connects the adapter to the network.
➋
➌
➊
LEDs are on
bottom side of
adapter board