Rockwell Automation 22-COMM-L LonWorks Adapter - Manual (Page 16)

1-6 Getting Started
The adapter uses three status indicators to report its operating status. They
can be viewed on the adapter or through the drive cover (
Figure 1.2 ).
Figure 1.2 Status Indicators (location on drive may vary)
If any other conditions occur, refer to Chapter 5 , Troubleshooting .
Modes of Operation
Item Status
Indicator
Normal
Status
(1)
(1)
If all status indicators are off, the adapter is not receiving power. Refer to Chapter 2 ,
Installing the Adapter , for instructions on installing the adapter.
Description
➊
PORT Flashing
Green Normal Operation. The adapter is establishing an I/O
connection to the drive. It will turn solid green or red.
Green Normal Operation. The adapter is properly connected and
communicating with the drive
➋
MOD Flashing
Green Normal Operation. The adapter is operating but is not
transferring I/O data.
Green Normal Operation. The adapter is operating and
transmitting I/O data.
➌
NET A Off Normal Operation. The adapter is configured.
➌
➊
➋
➌
➊
➋
Bottom side
of adapter board