Rockwell Automation 25-COMM-E2P PowerFlex 25-COMM-E2P Dual-Port EtherNet/IP Adapter User Manual
Page 156
156
Rockwell Automation Publication 520COM-UM003A-EN-E - June 2013
Appendix C
EtherNet/IP Objects
5
Get
Media Counters
STRUCT of:
UDINT
UDINT
UDINT
UDINT
UDINT
UDINT
UDINT
UDINT
UDINT
UDINT
UDINT
UDINT
RX = Received, TX = Transmitted
RX frames not having integral number of octets long
RX frames not passing FCS check
TX frames having one collision
TX frames having multiple collisions
Number of times of SQE test error message
TX Frames delayed first attempt by busy medium
Collisions detected later than 512 bit-times in trans.
TX frames failing due to excessive collisions
TX frames failing due to intern MAC sublayer TX error
Times of carrier sense condition loss during trans
RX frames exceeding the maximum frame size
RX frames failing due to intern MAC sublayer RX error
6
Set
Interface Control
STRUCT of:
WORD
UINT
Control bits
Forced interface speed
7
Get
Interface Type
USINT
Type of interface; 2 = twisted-pair
10
Get
Interface Label
SHORT_STRING
“1” = ENET1 network port
“2” = ENET2 network port
Attribute ID
Access Rule
Name
Data Type
Description