Rockwell Automation 837E Solid-State Temperature Sensors User Manual
Page 21
Advertising
![background image](/manuals/577490/21/background.png)
837E Solid-State Temperature Sensors User Manual
Operation
Pub #75054-004-08, March 2013
19
Programming with Personal Computer & ReadWin 2000
The 837E can also be configured via personal computer and ReadWin software. An
additional configuration kit with a conversion cable (Part number 836E-NSR) is required to
interface the USB port of the PC to the programming port of the temperature sensor, as
shown below.
Figure 9 Programming with PC
Personal computer with ReadWin configuration software
Configuration kit (836E-NSR)
Bulletin 837E with programming port
Note: For nondisplay version choose sensor type “PT100” in standard settings.
Programming cable adaptor 836E-NSRT is required for 837E nondisplay version when
using ReadWin 2000.
USB
Advertising