Rockwell Automation 284E ArmorStart EtherNet IP Communications and Control Programming Manual - Manual (Page 87)

Rockwell Automation Publication 280E-PM001A-EN-P – August 2011 87
ArmorStart ® EtherNet/IP ™ Communications & Control Programming Manual Appendix C
f. Click on the Source Element drop-down box and select the Data1 tag
that was created earlier and presses Enter.
g. Enter 5 for the Service Code, 1 for the Class, and 1 for the Instance.
Leave the Attribute value at 0. Once you have added these values, the
Service Type
should automatically change to Device Reset.