Rockwell Automation 20-750-DNET PowerFlex DeviceNet Option Module User Manual
Page 48
48
Rockwell Automation Publication 750COM-UM002B-EN-P - October 2012
Chapter 4
Configuring the I/O
21.
Click AutoMap to map the drive input image to the 1756-DNB scanner as
shown in the example dialog box below.
22.
Click the Output tab to display the output registers for the 1756-DNB
scanner.
23.
Click AutoMap to map the drive output image to the 1756-DNB scanner
as shown in the example dialog box below.
24.
Click OK.
If the Scanner Configuration dialog box appears asking to download these
settings to the 1756-DNB scanner, click Yes.
TIP
If your RSLogix 5000 project requires a different starting DWord
(double word, 32-bit) than the default value of ‘0’ for the drive input
image, set the Start DWord field to the appropriate value.
TIP
If your RSLogix 5000 project requires a different starting DWord
(double word, 32-bit) than the default value of ‘0’ for the drive output
image, set the Start DWord field to the appropriate value.