Rockwell Automation 283A ArmorStart with ArmorPoint Backplane - Getting Started User Manual
Armorstart, Distributed motor controller with armorpoint, Backplane
QUICK START
ARMORSTART
®
DISTRIBUTED
MOTOR CONTROLLER WITH
ARMORPOINT
®
BACKPLANE
Getting Started
BULLETIN 283A
Introduction
This guide provides the basic information required to start up your
ArmorStart
®
Distributed Motor Controller. Factory default settings
and information regarding installing, programming, and ArmorPoint
®
Communication Backplane, are described here. For detailed
information on specific product features or configurations, refer to the
ArmorStart user manual, Publication 283-UM001*-EN-P.
This guide is intended for qualified service personnel responsible for
setting up and servicing these devices. You must have previous
experience with and a basic understanding of electrical terminology,
configuration procedures, required equipment, and safety precautions.
For Bulletin 283A devices, you should understand Bulletin 1738
ArmorPoint adapter and I/O products.