Armorconnect power media, Description – Rockwell Automation 283A ArmorStart with ArmorPoint Backplane - Getting Started User Manual

Page 6

Advertising
background image

6

Publication 283A-QS001C-EN-P - July 2006

ArmorConnect Power Media

Description

The ArmorStart Power Media offers both three-phase and control power
cable system of cordsets, patchcords, receptacles, tees, reducers and
accessories to be utilized with the ArmorStart Distributed Motor Controller.
These cable system components allow quick connection of ArmorStart
Distributed Motor Controllers and reduce installation time. They provide
for repeatable, reliable connection of the three-phase and control power to
the ArmorStart Distributed Motor Controller and motor by providing a plug
and play environment that also avoids system mis-wiring. When specifying
power media for use with the ArmorStart Distributed Motor Controllers
(Bulletins 280, 281, 283, and 284) use only Bulletin 280 ArmorConnect™
power media.

Figure 4 Three-Phase Power System Overview

➊ Three-Phase Power Trunk- PatchCord cable with integral female or male connector on each end

Example Part Number: 280-PWR35A-M*

➋ Three-Phase Drop Cable- PatchCord cable with integral female or male connector on each end

Example Part Number: 280-PWR22A-M*

➌ Three-Phase Power Tees and Reducer -

Tee connects to a single drop line to trunk with quick change connectors – Part Number: 280-T35
Reducing Tee connects to a single drop line (Mini) to trunk (Quick change) connector – Part Number: 280-RT35
Reducer connects from quick change male connector to mini female connector– Part Number: 280-RA35

➍ Three-Phase Power Receptacles -

Female receptacles are a panel mount connector with flying leads – Part Number: 280-M35F-M1

Bulletin 283
ArmorStart

ArmorPoint

Bulletin 284
ArmorStart

Ethernet

PLC

Bulletin 1492FB

Branch Circuit

Protective Device

Enclosure

Bulletin 1606

Bulletin 1606

Bulletin 800F
Emergency Stop
Pushbutton

4

Computer

Terminal

Advertising