Rockwell Automation 283A ArmorStart with ArmorPoint Backplane - Getting Started - Manual (Page 12)

12
Publication 283A-QS001C-EN-P - July 2006
LED Status Indication The LED Status Indication provides 4 status LEDs and a Reset button. The
LEDs provide status indication for the following:
• POWER LED
The LED is illuminated solid green when control power is present and
with the proper polarity
• RUN LED
This LED is illuminated solid green when a start command and control
power are present
• NETWORK LED
This bi-color (red/green) LED indicates the status of the
communication link
• FAULT LED
Indicates Controller Fault (trip) condition
The “Reset Button” as a local trip reset.
Figure 6 LED Status Indication and Reset