Rockwell Automation 160IB1 InterBus Communication Module - Manual (Page 6)

p–ii Preface
Reference Manuals The following documents contain additional information concerning
Allen-Bradley products. To obtain a copy, contact your local Allen-
Bradley Sales Office or visit the “On-Line Publications” area of the
Allen-Bradley Internet home page at: www.ab.com.manuals
Safety Precautions
For Read This Document
Publication
Number
Additional information about networking and the SLC™ 500 SLC 500 Modular Hardware Style Manual 1747-6.2
Information about the AIC+ AIC+ Advanced Interface Converter User Manual 1761-6.4
Instruction set information for the SLC 500 and MicroLogix™
1000 SLC 500 and MicroLogix 1000 Instruction Set Reference Manual 1747-6.15
For general MicroLogix 1000 information MicroLogix 1000 User Manual 1761-6.3
For 160 SSC Drive Information 160 SSC™ Variable Speed Drive (Series C) User Manual 0160-5.17ML
A complete listing of current Allen-Bradley documentation,
including ordering instructions. Also indicates whether the
documents are available on CD-ROM or in multi-languages. Allen-Bradley Publication Index SD499
A glossary of industrial automation terms and abbreviations Allen-Bradley Industrial Automation Glossary AG-7.1
Information about the SSC-IBS-SLC™ Scanner Scanner Card User Manual. SST Woodhead documentation can
be obtained online at http://www.mySST.com/download/ Version 1.0
!
ATTENTION: Only personnel familiar with 160 Drives,
Communication Modules and associated machinery should
plan or implement the installation, start-up, configuration
and subsequent maintenance of this module. Failure to
comply may result in personal injury and/or equipment
damage.
!
ATTENTION: This module contains ESD (Electrostatic
Discharge) sensitive parts and assemblies. Static control
precautions are required when installing, testing, servicing,
or repairing this assembly. Component damage may result
if ESD control procedures are not followed. If you are not
familiar with static control procedures, reference
Allen-Bradley Publication 8000-4.5.2, Guarding Against
Electrostatic Damage or any other applicable ESD
protection handbook.
!
ATTENTION: The drive contains high voltage capacitors
which take time to discharge after removal of AC line power.
Before installing or removing the Communication Module,
ensure isolation of mains supply from line inputs R, S, T
(L1, L2, L3). Wait the recommended amount of time for the
capacitors to discharge to safe voltage levels (refer to the
160 SSC™ Variable Speed Drive (Series C) User Manual
for recommended time). Failure to do so may result in
personal injury or death.
!
ATTENTION: When a system is configured for the first
time, the motor must be disconnected from the machine or
process during initial system testing. Hazard of injury or
equipment damage may occur due to unintended or
incorrect machine motion.