Rockwell Automation 284G ArmorStart - Getting Started User Manual
Page 2
Advertising
2
Publication 284G-QS001A-EN-P - December 2008
Installation
The ArmorStart Distributed Motor Controller is convection cooled.
Operating temperature must be kept between -20…40
°
C (-4…104°F).
Dimensions
Dimensions are shown in millimeters (inches). Dimensions are not intended
to be used for manufacturing purposes. All dimensions are subject to
change.
Figure 1 Dimensions for 2 Hp and below @ 460V AC, IP67/NEMA Type 4
Advertising