Motor preparation – Rockwell Automation 1302 575v AC Drive - Canada Only User Manual
Page 35
Advertising
4–7
Installation
Publication 1302-5.0 — January, 1998
Follow these guidelines when preparing to install the motor:
•
Verify that the motor is the appropriate size to use with the
Drive.
•
Verify that the total motor lead length does not exceed the
values given in Chapter 3.
•
Follow the instructions in the motor instruction manual when
installing the motor.
•
Verify that the motor is properly aligned with the application’s
machine to minimize unnecessary motor loading due to shaft
misalignment.
•
If the motor is accessible when it is running, install a protective
guard around all exposed rotating parts.
Motor Preparation
Advertising