Rockwell Automation 1394 Upgrading Your Axis Module - Manual (Page 3)

Upgrading your Axis Module 3
Publication 1394–6.2 – March 1997
terminal and wear it at all times during this procedure.
4
3
6
5
3. Remove these two M3 x 6 mm flat head screws.
4. Remove these two M4 x 10 mm pan head screws.
5. Remove these six M3 x 6 mm flat head screws (three on each
side). Do not disconnect the face assembly from the board.
6. Remove these two M3 x 6 mm flat head screws.