Rockwell Automation 1394 Upgrading Your Axis Module - Manual (Page 7)

Upgrading your Axis Module 7
Publication 1394–6.2 – March 1997
3
2
5
4
2. Fasten these two M3 x 6 mm flat head screws.
3. Fasten these two M4 x 10 mm pan head screws.
4. Fasten these six M3 x 6 mm flat head screws (three on each side).
5. Fasten these two M3 x 6 mm flat head screws.
6. Attach the upgrade label to the axis module under the data name
label. This will notify future technicians that an upgrade kit has
been installed.
7. Go to Re-mounting the Axis Module.