Rockwell Automation 1394 Upgrading Your Axis Module User Manual
Page 5
Advertising
Upgrading your Axis Module
5
Publication 1394–6.2 – March 1997
Bottom of Axis Module
4
4. Unplug the green wire labeled PE2.
Bottom of Axis Module
5
6
5. Plug the ground wire (included in the kit) into terminal PE2.
Make sure the rounded side of the connecter faces away from the
bottom of the axis module.
6. Fasten this end of the ground wire to the hanger using the
remaining M4 x 12mm flat head screw included with the kit.
Advertising